remove led strip lights without ripping paint

How To Remove LED Lights Strip Without Ripping Paint

LED strip lighting is the best idea to decorate houses or offices. But what can you do if you feel bored with the existing LED strip light setup?

LED strip lights are used in homes for many purposes. Some people use them to decorate their rooms, washrooms, and kitchens but some use them to light their dark corners.

You have observed that we feel bored when we see the same things again and again. So, we need to change our surroundings after some time.

Whenever we want to change or remove the existing LED strip lights setup then we need to remove the strips from the wall. During this process, you may damage the paint on the wall.

But if the removal of LED lights is necessary then how can you take LED lights off without ripping paint?

So, let’s discuss the best ways to safely remove and re-stick LED strip lights.

How can you safely take off LED strip lights without taking off the paint?

Removing the LED strip lights without taking off paint from the wall or surface is too easy.

When we attach strip lights adhesives are used to stick them to the surface. So while taking off strip lights there is a high chance of peeling the paint off from the surface.

Although the removal process is not easy it is also not too difficult if performed properly. We have the best solution for your problem that 100% works.

Here are some easy steps to remove the LED strips safely.

Step 1:

First, you have to turn off the power supply and unplug the LED lights. This step is more important. If you skip this the live electricity is more dangerous for your life.

Step 2:

The next step is to soften the adhesive. You can use a heat gun or hair dryer to soften the layer of adhesive so that you can easily remove it from the wall.

For the protection of strips heats the adhesive in less than two minutes otherwise it will damage the lumen which affects its lifespan.

Step 3:

Now you can easily put off the lights. But you have to be careful. Use the plastic scraper or a credit card to softly separate the strips from the wall.

Step 4:

After removing the strips from the wall if you see any adhesive residue remaining on the wall softly rub the wall with your thumb. Or you can use rubbing alcohol to clean the wall.

Make Blacklight with LED Strip Lights

What Color LED Lights Keep Spiders Away

How to Restick your LED Lights without Damaging the Wall and Peeling Off paint

This is the biggest advantage of LED strip lights, that you can use them again and easily install them everywhere. For reinstalling or re-sticking of LED strip light, you have to follow these simple steps.

  1. First, you have to decide where you want to install the strip lights. After selecting the area of installation you have to clean the surface from dust or oil so that it will not affect the adhesive. For cleaning you can use detergent and warm water. make sure your wall or a surface is properly cleaned.
  2. Check the adhesive on the back side of the strips. if the adhesive is in good condition then you can easily use it again. but if the adhesive is in a bad condition remove it properly and find the other adhesive.
  3. Use the removable adhesive strips if you want to save your paint from any damage. because they are designed not to damage the paint or wall.For the purpose of re-stick the LED strips you can also use hot glue. Hot glue is safe for the paint’s consistency because it does not contain any strong chemicals.
  4. Now you can easily install your strips.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *